Hardware used by the mason to hold the red brick to the wall and let the moisture out from the back side through the gray weep blocks. The metal tringle and bracket is used to hold the red brick a fixed distance away from the green glass board, attached to the structural studs. The trangled bracket is placed in the concrete mortor between the rows of bricks. On November 20th I posted a picture showing this hardware in place.
This is just one of the brackets that the plumbers are using to hang the pipes from the red iron. The C clamp is placed over the edge of the red iron and tighten down then the threaded rod or hanger is threaded into the bracket and adjusted to the right height. On Novmber 25th I posted a picture of the 3" copper pipe that is hung with these hangers.
No comments:
Post a Comment